taming energy
MCC MOTOR CONTROL CENTER
The MCC panels are mostly equipped with molded case circuit breakers, motor protection switches, contactors and regulation and control equipment. These panels have a strong metallic structure, are made up of floor cabinets internally divided into compartments or equipped with drawers and have enclosed functional areas.
Unlike the Power Center, each compartment does not contain a single switch or device, but all the protection, control and signaling components intended for the control of each individual motor. The design currents and the related short-circuit currents are lower than in the case of the main panels, but they still have a considerable importance in the distribution system.
MCC panels are an essential solution for plants that need to operate with a continuous cycle since they do not require prolonged stops of the motors (e.g. oil, chemical, and metallurgical plants, thermal power stations, etc.); moreover their design and functional philosophy meets the primary needs.
Main advantages:
Centralizing all devices and equipment dedicated to the protection and control of the plant motors in order to ease their use even when the staff members are few.
Facilitating maintenance, immediately restoring the damaged drawers with spare ones, which are modularly interchangeable and functionally replaceable, in order to assure the maximum operational continuity of the plant.
Centralizing all devices and equipment dedicated to the protection and control of the plant motors in order to ease their use even when the staff members are few;
Facilitating maintenance, immediately restoring the damaged drawers with spare ones, which are modularly interchangeable and functionally replaceable, in order to assure the maximum operational continuity of the plant.
Other advatages:
• Ensuring maximum operating safety, safeguarding the operators from any possible injury, including the internal arc withstand on the four sides;
• Streamlining the plant changes, given that each module is specifically designed to allow easy composition changes and expansions even with live panel, without jeopardizing the proper operation of the plant and the uniformity of the project.
Other advatages:
• Ensuring maximum operating safety, safeguarding the operators from any possible injury, including the internal arc withstand on the four sides;
• Streamlining the plant changes, given that each module is specifically designed to allow easy composition changes and expansions even with live panel, without jeopardizing the proper operation of the plant and the uniformity of the project.
